Menu
Cart

Yamaha PA2120

Output power 3Ω 100W x 2 (20ms Burst)

Output power 4Ω 120W x 2 (20ms Burst)

Output power 8Ω 100W x 2 (20ms Burst)

High impedance: 100V line 120W x 2 or 200W x 1

High impedance: 70V line 120W x 2 or 200W x 1

W x H x D 480x45x379mm

Net weight 4.9kg (10.8lbs)

Categorie: ,

Descrizione

Descrizione

Gli amplificatori Yamaha Serie MA e PA offrono funzioni potenti in uno chassis in metallo resistente e compatto ideale per installazioni commerciali. Progettati per un’operatività semplice e intuitiva, non richiedono alcuna esperienza musicale o tecnica. Il knob del volume in uscita costituisce il focus del pannello frontale, riducendo al minimo le possibilità di errore. Non sono necessari software, programmi o dispositivi particolari per l’installazione o il setup. Gli amplificatori mixer MA e PA offrono una line-up in grado di soddisfare un’ampia gamma di applicazioni single e multi zona ideali per aule didattiche, auditorium, cafè, ristoranti, permettendo di miscelare in maniera manuale o automatica le sorgenti di ingresso quali lettori cd, computer, microfoni.

Specifiche complete

Output power 3Ω 100W x 2 (20ms Burst)

Output power 4Ω 120W x 2 (20ms Burst)

Output power 8Ω 100W x 2 (20ms Burst)

High impedance: 100V line 120W x 2 or 200W x 1

High impedance: 70V line 120W x 2 or 200W x 1

Total harmonic distortion ≤0.2% (Line in to Speaker out, Half power @1kHz, 3Ω/4Ω/8Ω), ≤0.2% (Line in to Speaker out, Half Power @1kHz, 70V/100V, 120W/200W)

Frequency response 0dB, -2.5dB, +1.0dB (Line in to THRU OUT, 20Hz to 20kHz), 0dB, -3.0dB, +1.0dB (Line in to Speaker out, 50Hz to 20kHz, 1W, 3Ω/4Ω/8Ω), 0dB, -3.0dB, +1.0dB (Line in to Speaker out, 90Hz to 20kHz, 1W, 70V/100V, 120W/200W)

Crosstalk –

Mic/Line Input –

Line Input Input A-B:MONO RCA pin x 2 (unbalanced) or 3.5mm Euro block (6-pin, balanced)

Speaker Output Barrier strip x 2 pairs

Line Out THRU OUT: MONO RCA pin (unbalanced) x2

Control ports RJ-45 (for DCP4V4S, DCP1V4S , DCP4S), Remote (3.5mm Euro block 3-pin)

Mic Input –

Stereo Input –

Input Level Line input (unbalanced): -10dBV (Sensitivity), -10dBV (Nominal), +10dBV (Max before clip) / Line input (balanced): +4dBu (Sensitivity), +4dBu (Nominal), +24dBu (Max before clip)

Livello di uscita -10dBV (THRU OUT, Nominal)

Processors Speaker EQ (VXS:Full Range, VXC, VXS10S/ST), HPF (150Hz), LPF (150Hz, 200Hz)

Protection circuit Power switch on/off: Mute the output*, Output voltage protection: Compress the output*, DC-fault: Power supply shutdown (*Restored automatically)

Amplifier protection Thermal: Limit the output* → Mute* → Shutdown, Over current: Mute the output*, Integrated power limit: Compress the output* (*Restored automatically)

Power supply protection Thermal: Power supply shutdown, Over voltage: Power supply shutdown, Over current: Limit the output* →Power supply shutdown (*Restored automatically)

Amplifier class Class D

Cooling Conventional cooling, bottom to up airflow

Power requirements 100V, 120V, 230V – 240V, 50Hz / 60Hz

Power consumption 60W (1/8 max power, 4Ω, AC100V, pink noise at all channels)

W 480mm (18.9”) *1

H 45mm (1.8”) *1

D 379mm (14.9”) *1

Net weight 4.8kg (10.6lbs)

Accessories AC power cable, 3.5mm Euroblock plug (6-pin) x 1, Euroblock pulg (3-pin) x 1, Owner’s manual, Specification sheet

Options DCP4V4S, DCP1V4S, DCP4S (Digital Control Panel)

Certificate ENERGY STAR

Others Operating Temperature: 0°C to + 40°C, Storage Temperature: -20°C to + 60°C, Rack-mountable when ensuring sufficient ventilation above and below the unit